| ADDITIVES
|
 |
|
|
SA5 RETARDER FOR SPRAY AND BRUSH APPLICATIONS
Directions for Use:
| 1. |
Measure 2-15% by liquid volume of SA5 to be used in coating. |
| 2. |
Slowly pour SA5 into coating being reduced, mix well during addition. |
| 3. |
Adjustments of SA5 percentages may be needed to achieve spray or brush results required. Do not exceed 15% by liquid volume. |
| 4. |
After addition of SA5, allow the thoroughly mixed solution to settle and synergize for a minimum of 30 minutes before using. If SA5 is not properly incorporated into the finish, fisheyes and poor leveling may occur. If poor film formation occurs, continue to mix SA5/finish solution and allow to settle for 1 hour before use. Do not add additional SA5. |
Note: If CL100 Cross-Linking Catalyst is also being used add SA5 after catalyst. See directions on catalyst bottle for proper use and handling.
|
