SANDING & POLISHING

Bulldog Gold®, Royal Micro®, Abralon®: Mirka Abrasives, Inc. manufactures a complete line of sandpaper and polishing disks that complement and enhance the performance of all our water-based coatings.

Whether you are starting fresh with newly milled wood or restoring an expensive antique, Mirka offers a comprehensive line of Grip-Back, PSA and Waterproof papers that are stearate-free and long lasting. We have selected the best papers in the Mirka line to provide you with immediate success.

Bulldog Gold

Premium grade papers for fine finishing as well as heavy stock removal. Durable aluminum-oxide grain delivers a fast, long lasting cut. C & D-weight backing is 50% stronger then premium-brand A-weight papers.

Available in Grip-Back (hook & loop) and PSA style backing ranging from 80-grit to 500-grit in 5" disks, or 9"x11" sheets.

Royal Micro

I regularly use Royal Micro during the build-up stages of a finish application. These premium Fine-Grade papers allow me to work runs, sags and nubs without removing excessive amounts of film build. The Royal Micro papers ensures longer life and better lubrication when used wet or dry in a Grip-Back or PSA disk configuration ranging from 5" 600-grit to 1500-grit.

Mirka Waterproof

Manufactured with a unique latex backing to prolong the life of the paper during wet sanding procedures, Mirka Waterproof provides a fine scratch pattern for an improved final stage sanding before polishing. Used wet or dry for final stage surface preparation.

Available in 9"x11" sheets, grits 600-2000.

Abralon Finishing Disks

Final stage sheen adjustment has never been easier with Abralon disks. You can uniformly adjust the sheen from 10° flat to a 90° high-gloss when used in conjunction with a random-orbital sander. Designed with an abrasive cloth and non-woven, open cell mid-section to hold large amounts of water or solvent for lubrication and cooling. Abralon disks will reduce your final polishing and repair time by as much as 50% when compared to traditional hand rubbing and buffing. The Grip-Back design can be attached directly to a hook & loop disk, or used in conjunction with a variety of interface pads when working radius or profiled surfaces.

Available in 6 "500 to 4000-grit configurations.